Konica Minolta verkündet, die Herstellung der Probebeschichtungsanlage der OLED Beleuchtung an der Hino Anlage in Tokyo. Das Unternehmen sagt, es entwickelte die OLED-Illumination, wie einen seiner „entsprechendesten neuen Betriebe im Bereich der Energie und Umwelt“.
Die Probefertigungsanlage hilft, das Herstellungsverfahren für Massenerzeugung einzusetzen und die OLED-Produkte in beschränktem Umfang zu verkaufen.
Die Einrichtung begann Mitte November 2009 und endet voraussichtlich zum Herbst 2010. Das Gesamtinvestment macht 3.5 Milliarden Yen (circa $39 Millionen) aus, dabei wird das Produkt im Laufe des Finanzjahres 2010 kommerzialisiert.
Vor der Vereinigung gelang es Konica Minolta im Juni 2006, das Gerät mit weißen organischen Leuchtdioden mit der weltbesten Energieeffizienz von 64 Lumen/Watt an 1 000 Candela/ m2 zu entwickeln, dabei hat die Lichtquelle die Brennzeit von 10 Tausend Betriebsstunden, was für Beleuchtungsanwendungen passt.
Technologien, wie Materialherstellung-, Beschichtungs-, Multi-Layer-Design-Technologien und optisches Design, waren durch Entwicklung des photographischen Films und optischen Lampenglases wachsen gelassen und waren völlig bei der Entwicklung von OLED Beleuchtung angenommen. Dieses Verfahren wird als Schlüssel zum Erreichen des Kostenvorteils dienen, wenn die OLED Beleuchtung in der Zukunft aufblüht.
Dank solchen beispiellosen Eigenschaften zieht die OLED-Beleuchtung die Aufmerksamkeit auf sich wie die Beleuchtung der nächsten Generation, wie Flexibilität, Dünne, Leichtgewicht und Form eines Blattes. Dazu besitzt diese eine hohe Stromeffizienz, die Fähigkeit wenig Abwärme beim Einsatz zu produzieren, und die Einfachheit der Verarbeitung, weil solche Lichtquellen kein Quecksilber gegenüber den Fluoreszenzlampen enthalten. Zudem strahlen die OLED-Leuchten das Licht, das die menschlichen Augen als angenehm empfinden, welches keine UV-Emissionen hat und in Form des Blattes sein kann.
Konica Minolta sagt, es betrachtet die OLED-Beleuchtung als eines der erfolgversprechenden stromsparenden und umweltfreundlichen neuen Betriebe, wo das Unternehmen sichere Positionen mit der erwähnten Technologie gewinnen kann.
Posts Tagged ‘led’
Konica Minolta plant, die Probefertigungsanlage für OLED Beleuchtung zu bauen.
6 April 2010 - 10:00Konica Minolta to Construct an Innovative Pilot OLED Illumination Manufacturing Line in Tokyo
6 April 2010 - 10:00Recently, representatives of Konica Minolta informed that the company constructs an innovative pilot OLED illumination manufacturing line within Hino facility in Tokyo. It should be mentioned that OLED lighting isn’t a new field for Konica, as it’s been developing the specified technology since 2006 and has already achieved great results.
Konica tends to establish the production technology for mass production with help if the named pilot line and to sell OLED lighting fixtures.
Pilot line building began in November, 2009 and is to last for about a year, by autumn 2010. Konica invests 3.5 billion yen or around $39 million in total. The manufactured OLED light sources are to be commercialized within the same fiscal year. To achieve this aim, in March 2007, Konica Minolta concluded a strategic alliance agreement with General Electric Company (headquartered in the USA) to speed up development of OLED illumination products.
In June 2006, when alliance didn’t exist, Konica Minolta managed to create a white OLED lighting fixture with the world highest energy efficiency of 64 lumens per watt at 1000 candela per square meter with lifespan of 10 thousand hours without reduction of the light quality. The specified parameter are quite suitable for lighting applications, what open new opportunities for OLEDs.
The pilot line uses an innovative patented with Konica Minolta roll-to-roll coating method, which allows the company to offer a flexible plastic-base OLED illumination. The method makes the main contribution to financial appeal of OLED light sources.
OLED lighting is considered as a very attractive one due to some its’ features like wonderful flexibility, light weight, unbelievable thinness, outstanding power efficiency, low operating temperature, absence of mercury in its’ structure and sheet form. There can be found other advantages, which can be seen with anyone. Such light sources do not emit ultra-violet rays, so their light is mild and friendly to people.
Konica Minolta believes that OLED lighting technology combines two essential for the future features, they are environmentally friendly and require low costs, which are the most desirable options.
Philips Wins Hong Kong Design Award for Advanced LED Technology
26 March 2010 - 10:00Royal Philips Electronics announced that the Philips’ Led candle, from the Novallure series, has been recognized by the Hong Kong Designers Association with the silver HKDA Asia Design Award 09. According to Philips, advantages of the LED candle include reduced energy consumption, reduced carbon pollution, bright sparkle and similar ambient light effect at significant lower power wattage. The retrofit lamp is designed to be seen. Its performance is matched by a cool, streamlined styling. What makes the design of the LED candle innovative and different from other LEDs is the candle shape and its bright sparkling and ambient light effect. The LED candle is made specifically for chandeliers and kind-like luminaires. The HKDA Award originated in Hong Kong in 1975 and has become one of the biggest professional design competitions in the region. It is a comprehensive multidisciplinary award for professional design in the fields of graphic, product, spatial and new media. The Philips LED candle has been awarded for its product design.
Philips gewinnt den Hong Kong Design-Preis für eine verbesserte LED-Technologie
26 March 2010 - 10:00Royal Philips Electronics teilt mit, dass Phillips´ LED Kerze aus der Novallure Serien der Hong Kong Designerassociation mit dem silbernen HKDA Asia Design-Preis 2009 anerkannt wurde.
Laut Philips bietet die LED Kerze folgenden Vorteile, wie einen verminderten Stromverbrauch, eine reduzierte Kohlenstoffemissionen, starkes Leuchten und der Raumbeleuchtung ähnlicher Effekt unter der viel niedrigeren Betriebswattzahl.
Diese Sanierungslampe wurde speziell entwickelt, um gesehen zu werden. Die Leistung ist mit einer frischen und stromlinienförmigen Formgestaltung ergänzt. Das Design der LED-Kerze sieht innovativ aus und unterscheidet sich auch wegen der Kerzenform, ihres starken Leuchtens und des der Raumbeleuchtung ähnlichen Effekts von anderen Leuchtdioden. Diese LED-Kerze ist speziell für Kronleuchter und ähnliche Leuchten geeignet.
Der HKDA Preis entstand in Hong Kong 1975 und wurde einer der größten professionellen Designwettbewerbe in der Region. Es ist ein umfassender fach-übergreifender Preis für das professionelle Design in solchen Bereichen, wie Graphik, Produkt-, räumliche und neue Medien. Die Philips LED-Kerze ist für ihr Produkt-Design ausgezeichnet worden.
Taiwan-based Led supplier Epistar Corp. and United Microelectronics Corp. (UMC) have formed an led chip joint venture based in Mainland China.
23 March 2010 - 10:00Recently, Epistar has revealed that it plans to invest $128 million in two China-based ventures, including $120 million in an LED epiwafer and chip manufacturing venture tentatively called Changzhou Co. In the second filing, Epistar said it would invest $8 million in another LED epiwafer and chip venture in China, United LED Corp. UMC said in a filing dated Dec. 15 that it would also invest $8 million in a Mainland China venture called United LED Corp. A spokesperson for UMC Wednesday confirmed that the firm is joint venture between UMC and Epistar. United LED is based in the province of Shandong, in the eastern coastal area of China, according to the filings. Taiwan-based IT news reported that Epistar and UMC will each have a 50 percent stake in United LED.
UMC said in a regulatory filing of its own that it would invest $1 million in a company called U-Lighting Opto Electronic Inc. —also based in Shandong— through a firm called United Lighting Opto-Electronics Investment Ltd. It was not immediately clear whether this investment is related to United LED. UMC described the main business of United LED as LED chip design, manufacture and sales.
Epistar und UMC planen die Gründung eines gemeinsamen Unternehmens, um Leuchtdioden in China herzustellen.
23 March 2010 - 10:00Der Taiwan-basierender LED-Hersteller, Epistar Corp. und United Microelectronics Corp. (UMC) haben ein gemeinsames Unternehmen gegründet, um die LED-Chips in China herzustellen.
Vor kurzem deckte Cree auf, es plane $128 Millionen in zwei China-basierende Unternehmen zu investieren, dazu zählen auch $120 Millionen Investitionen in LED-Epi-Wafer und LED-Chips produzierende Unternehmen in China genannt Changzhou Co. Den zweiten Platz in der Liste nimmt LED-Epi-Wafer und der LED-Chips produzierende Unternehmen in China, United LED Corp., welches $8 Millionen bekommt. UMC sagte, es würde auch in das China-basierende Unternehmen, United LED Corp investieren. Der Pressesprecher an UMC bestätigte, die Firma ist das gemeinsame Unternehmen von UMC und Epistar.
United LED befindet sich nach der Anmeldung in der Provinz Shandong, im östlichen Küstengebiet von China.
Die IT news aus Taiwan berichten, Epistar und UMC haben je 50% von United LED.
UMC meldete, es würde $1 Million in U-Lighting Opto Electronic Inc., das sich auch in Shandong befindet, durch die Firma United Lighting Opto-Electronics Investment Ltd. investieren.
Es ist nicht völlig klar, ob diese Investitionen sich auf United LED beziehen. UMC beschreibt das Hauptgeschäft von United LED als Entwicklung, Herstellung und Verkauf der LED-Chips.
Endlich Weihnachten – schell, günstig und unkompliziert LED-Weihnachtsbeleuchtung bestellen!
OSRAM to Manufacture Ultra Slim OLEDs
19 March 2010 - 10:00OSRAM Opto Semiconductors has recently informed the mass media about newly invented absolutely transparent and extremely slim OLED prototypes. These tiny light sources are only a few hundred micrometers thick and do not require separate encapsulation, what makes their installation much easier and less expensive. The innovative OLEDs offer a 210 cm2 luminous area and feature a really giant potential, which is still not covered completely.
The new OLED panel is very thick, so when it’s switched off, it can be hardly seen. When switched on, it emits even light with its’ whole surface and offers great luminance.
The described prototypes have appeared due to TOPAS research project funded by the Germany Ministry for Education and Research (BMBF), which aims to create 1 m2 large transparent OLED modules and will finish by 2011.
The demonstrated 17×17cm2 modules are to be larger, but their properties are to stay the same. These innovative light sources are very thick and do not require any encapsulation that needed additional expenses. The substrate takes the main part of their thickness and makes from 300 and 700 μm.
Dr. Karsten Heuser, head of the OLED division at OSRAM Opto Semiconductors, says that the customers can find transparent and flexible organic light emitting diodes, which are to change existing lighting solutions in the better way. Designers obtain numerous new opportunities in design, as these OLEDs can be built in furniture, room dividers and even windows, what permits to make an illusion of natural light at night.
The described OLED panels can be manufactured completely transparent without application of detracting structures, what is possible due to achievements in electrode design and innovative approach to thin-film technology. Additional conductor path structures on the luminous surface are not required in this case, but the current goes evenly over the whole surface and transforms to light. The mentioned achievement simplifies and makes cheaper the manufacturing of these OLEDs. Presently, this technology is to be adopted practically.
The mentioned OLEDs could be found at PLDC (Professional Lighting Design Convention), which took place from October 29 to 31, 2009 in Berlin.
OSRAM stellt extrem flache organische Leuchtdiode her.
19 March 2010 - 10:00OSRAM Opto Semiconductors berichtet, dass es einen neuen transparenten OLED Prototype mit einer Dicke von nur einigen Hunderten Mikrometern entwickelt hat, die keine separate Einkapselung benötigen. Die Musterbauteile haben eine leuchtende Fläche von 210 cm² und zeigen schon jetzt das riesengroße Potential von OLED Leuchtmitteln.
Im Ausschaltzustand ist die OLED-Leuchte fast unsichtbar. Wenn diese angeschaltet ist, strahlt die das ebene Licht mit der ganzen Fläche aus.
Die Probestücke waren als Teil des Forschungsprojektes TOPAS entwickelt worden, welches mit dem Bundesministerium für Bildung und Forschung (BMBF) gegründet wuede. Das Ziel des Projektes ist es, die transparenten OLED Module mit der Größe von 1 m² zu schaffen. Das wird bis 2011 laufen.
Obwohl die 17×17 cm² Module größer gemacht werden sollen, haben sie schon viele Eigenschaften, durch die die OLEDs sich von den anderen Lichtquellen unterscheiden. Sie sind äußerst dünn und benötigen keine teure Einkapselung. Ihre Dicke bestimmt nur die Basisplatte als ein Trägermaterial, das von 300 bis 700 μm dick ist.
“Transparente OLEDs und flexible OLEDs werden den Beleuchtungslösungen völlig neue ästhetische Dimensionen geben,“ sagt Dr. Karsten Heuser, ein Vorsitzender der OLED Abteilung an OSRAM Opto Semiconductors. „Die Möglichkeiten schließen auch die Lichtquellen ein, die man in Möbel und Zimmertrennwände einbauen kann, zum Beispiel, in das ganze Fenster, was erlaubt, das Zimmer den ganzen Tag mit dem natürlichen Licht und mit dem Lampenlicht in der Nacht zu beleuchten.“
Die OLED Panelen können transparent ohne Verwendung der Aufbauten gemacht werden, welche die Effizienz senken. Dies wurde dank den neuen Entwicklungen in Elektrodenbauweise, der speziellen Komponentenbauweise und dem neuen Ansatz an Dünnschichttechnologie möglich. Ohne zusätzliche Leiterbahnbauteile auf der leuchtenden Fläche geht der Strom eben über die aktive Fläche, welche in Licht umwandelt. Die neue Technologie vereinfacht den Herstellungsprozess. Die nächste Stufe ist, diese Technologie in den stabilen Herstellungsvorgang zu integrieren.
Diese OLEDs zeigte man bei PLDC (Professional Lighting Design Convention) von 29. bis 30. Oktober in Berlin, um den heutigen Zustand der Entwicklung zu demonstrieren.
On the 10th anniversary of Lighting the Times Square Ball for New Year’s Eve, Philips Electronics is including more led lights in the ball and 2010 numerals, achieving a 78% energy savings.
15 March 2010 - 10:00In 2007, Philips converted the ball’s lights from incandescent and halogen bulbs to Led technology. This year, Philips custom designed 545 scalloped LED flood light bulbs for the 2010 numerals that use only 9 watts compared to 40 watts consumed by the older incandescent and halogen bulbs. The 2010 LED bulbs were designed for outdoor use and are expected to last for 25,000 hours in the Times Square application.
Sustainability of the celebration has been augmented by Duracell’s Smart Power Lab in Times Square, where the public was invited to pedal a Power Rover to generate energy that has been stored in giant Duracell batteries that will power the 2010 numerals when the ball drops at midnight on New Year’s Eve.
Scientists have been studying LEDs for decades. The foundations for LEDs were discovered in the early 1900s and commercial applications were created in the 1960s for use as indicator lights. Development of LED technology has propelled LEDs into a brighter, longer-lasting and more energy-efficient light source than conventional lighting.
The efficiency of Led lighting is touted in a December white paper by Cree Inc. Cree says results from several recent studies show that LEDs are likely the most efficient, greenest option for many high-volume lighting applications. At least one study has found that LEDs outshine incandescent light bulbs in lifecycle assessment.
One private company, LED Saving Solutions provides businesses of all sizes and types and property owners and lessees relief from exorbitant utility and maintenance costs associated with lighting. LED Saving Solutions provides lighting upgrades with LED lights that reduce electricity demand by up to 80 percent, allowing a business or property owner or lessee to reduce costs immediately as well as a means to reduce a facility’s carbon footprint.
The applications for LED lights are also evolving outside of commercial applications. For example, even LED wallpaper has been created by British firm Lomox. A coating containing LEDs on the paper can even be dimmed with a switch, according to elightbulbs.com. Scientists are even studying how to combat wrinkles using LED light and green tea.
Die berühmte Zeitkugel am Times Square wird mit LED-Leuchten ausgerüstet
15 March 2010 - 10:00Zur Feier des 10. Jahrestages des Leuchtens der Silvesterkugel am Times Square am Altjahresabend rüstet Philips Electronics die genannte Kugel und 2010 Ziffern mit mehreren Leuchtdioden aus, was die Stromeinsparungen von 78% ermöglicht.
In Jahr 2007 ersetzte Philips die Glüh- und Halogenkugellämpchen mit innovativen Leuchtdioden. In diesem Jahre schuf Philips 545 spezielle Scheinwerfer für 2010 Ziffern, die nur 9 Watt imgegensatz zu den alten Glüh- und Halogenbirnen, welche 40Watt verbrauchen. Die 2010 LED-Birnen wurden speziell zum Außeneinsatz entwickelt und sollten 25 Tausend Betriebsstunden am Times Square leuchten.
Die Feier wurde auch mit Duracell´s Smart Power Lab am Times Square unterstützt, wo jeder Interessierte ein spezielles Rad fahren konnte, um die Energie zu generieren, die in riesigen Duracell Batterien gespeichert wird. Diese Energie schaltet die Silvesterkugel und 2010 Ziffern am Times Square ein.
Die Wissenschaftler erforschen die Leuchtdioden schon lange Jahre. Die grundlegenden Kenntnisse erfuhr man noch am Anfang des 20. Jahrhunderts, aber das erste Mal wurden die Leuchtdioden nur als Kontrollleuchte im Jahre 1960 kommerziell verwendet. Die Entwicklung der LED-Technologie verwandelte die LEDs in hellere, langlebigere und stromsparendere Lichtquellen als die konventionellen Beleuchtungsmittel.
Die hohe Effizienz der LED-Beleuchtung ist mit Weißbuch von Cree Inc. im Dezember 2009 bestätigt. Cree sagt, die Ergebnisse der einigen letzten Studien zeugen davon, dass die Leuchtdioden die effizienteste und grünste Option für viele kommerzielle Beleuchtungseinsatzbereiche ist. Wenigstens ein Studium stellte klar, dass die Brennzeit von LEDs die von Glühlampen wirklich übersteigt und die LEDs die Energie viel effizienter nutzen. Ein Privatunternehmen, LED Saving Solutions, bietet allen anderen Firmen jeder Form und Größe, die äußerst hohen Stromausgaben mit Hilfe von innovativen Illuminationslösungen zu vermeiden. Das Unternehmen ersetzt alle Leuchten mit LED-Lampen, was die Energieeinsparungen von 80% ermöglicht und dadurch nicht nur Stromverbrauch, aber auch Kohlendioxidemissionen bedeutsam reduziert.
Die Verwendungsgebiete von LEDs treten auch über den Rahmen des kommerziellen Einsatzes hinaus. Zum Beispiel, wurde sogar eine Tapete mit dem britischen Unternehmen Lomox entwickelt. Eine Decke aus Papier, die Leuchtdioden enthält, kann mit einem Schaltgerät gedimmt werden, wie elightbulbs.com sagt. Die Wissenschaftler erforschen auch, wie man Runzeln mit Leuchtdiodenlicht und Grüntee bekämpfen kann.
